Summary¶
Installation of the usb drivers went well, i reinstalled the arduino-ide, downloaded the board-manager URLs. Orand andqueries mac os. Once I opened the first example sketch and wanted to upload it to the board, I got the following result: Arduino: 1.8.10 (Mac OS X), Board: 'CubeCell-Board, REGIONEU433, CLASSA, OTAA, ON, UNCONFIRMED, OFF, ON. Installation instructions for Mac OS. Install latest Arduino IDE from arduino.cc. Open Terminal and execute the following command (copy-paste and hit enter one by one). 高品质的Micro-USB数据线； 将胶囊连接到调试板； 安装CP2102 USB-UART bridge驱动程序。 在大多数情况下，Windows、Mac OS和Linux将自动识别CP2102 USB-UART bridge。如果无法正确识别，请参考建立串行连接.
Pay attention to the following issues while using a capsule sensor
The capsule sensor itself is positioned as a small-sized, assembled and deployed sensor. It does not have programming, debugging, and other interfaces. You need to use the Debug Board in order to program and debug the program; Sinister cubes mac os.
Due to storage and transportation issues, the battery is not integrated inside the capsule by default. Users in mainland China can inform our customer service when placing an order and we will provide integrated battery services.
Get Ready¶
Correctlly install CubeCell Arduino development framework；
A high quality Micro USB cable;
Connect Capsule to Debugger board；
Install CP2102 USB-UART bridge driver.
In most cases, Windows, Mac OS, and Linux will automatically recognize the CP2102 USB-UART bridge. If it is not recognized properly, please refer to here.
Capsule Sensor Test¶
Basic Test¶
In the example menu CubeCell-xxxxSensorExamples, is the basic test program used by capsule sensors, which can be used to quickly verify the sensor and read the value from sensors:
Heltec Produced Sensor Examples: Sensor modules made by Heltec. Sensor List: https://github.com/HelTecAutomation/ASR650x-Arduino/blob/master/libraries/SensorBasic/readme.md Inefable mac os.
Third Party Sensor Examples: For third-party sensor modules developed by users. Sensor List: https://github.com/HelTecAutomation/ASR650x-Arduino/blob/master/libraries/Sensor_ThirdParty/readme.md
Transmit Sensor Data Via LoRaWAN protocol¶
Tip
This part operations must performed with a gateway that supports the standard LoRaWAN protocol.
In the example menu LoRa→LoRaWAN→LoRaWAN_Sensors(_ThirdParty), we provided some examples transmit sensor's data via LoRaWAN protocol.
In all sensor & LoRaWAN examples, the sensor data is read once before sending. For example, in the HDC1080 temperature and humidity sensor example:
The PrepareTxFrame had read temperature (float), humidity (float) and battery voltage (unsigned int). And convert data to a char. The contents:
Why convert data to byte?¶
Everyone knows that float data occupies 4 bytes in memory, and unsignedint data occupies 2 bytes. Suppose you have a very accurate sensor, for example, the measured data is 12.34567890987654321, if send this data via string like chardata[]='27.313232421875', it will spend 15 bytes. but if transmit in byte 8081DA41, only spend 4 bytes.
External resources¶
Cube Cell Mac Os X
Get ready a LoRa gateway
